BEA Sensors
BEA 10EVOLOOP EVOLOOP 60 GHz Radar Virtual Loop Sensor for Automatic Barriers
- SKU:
- 10EVOLOOP
- Availability:
- Check supplier stock and lead time. USD $525.00 reference price from Protec Controls.
Product Overview
BEA EVOLOOP 10EVOLOOP 60 GHz Radar Virtual Loop Sensor for Automatic Barriers
The BEA EVOLOOP replaces traditional in-ground induction loops and related detector configurations for vehicle detection at automatic barriers. Using 60 GHz FMCW radar, it creates up to three configurable virtual detection zones to support presence detection, access activation and collision protection in parking and vehicle access lanes. The retailer lists the model as 10-EVOLOOP; the US manufacturer cut sheet identifies the product code as 10EVOLOOP.
Key Features & Benefits
- Creates up to three configurable radar-based virtual loops without cutting induction loops into pavement.
- 60 GHz FMCW radar detects approaching and present traffic up to 7 m / 23 ft.
- Presence and protection settings help operate barrier-arm opening and closing cycles and limit unintended impacts.
- Use the mobile app to teach in loops, set vehicle/object types and choose movement directions to filter cross-traffic.
- Wide 140° field of view with adjustable antenna angle.
- Field installation supports typical automatic barriers and parking access control lanes.
- IP65-rated enclosure suitable for specified outdoor operating conditions.
- Compatible with appropriate 12–30 VDC or 12–24 VAC power supplies; low typical power requirement.
Technical Specifications
| Manufacturer | BEA Sensors |
|---|---|
| Model / SKU | 10EVOLOOP (supplier also formats as 10-EVOLOOP) |
| Product | EVOLOOP radar virtual-loop vehicle detection sensor |
| Technology | 60 GHz FMCW microwave radar |
| Detection types | Vehicle presence, activation, and barrier-arm protection |
| Maximum detection field | Up to 23 ft / 7 m |
| Virtual loops | Up to 3 independently configurable loops |
| Radar field of view | 140° horizontal opening angle; 40° elevation |
| Antenna angle adjustment | -20° to +20° |
| Installation height | 12–27 in (approx. 30–70 cm) above road surface |
| Power | 12–30 VDC ±10% or 12–24 VAC ±10% |
| Power consumption | Less than 3 W |
| Outputs | 2 isolated electronic relays plus 1 relay |
| Test input | 1 isolated optocoupler |
| Bluetooth frequency | 2402–2480 MHz; max transmission power 12 dBm |
| Sensor dimensions | Approximately 2 × 6 × 3 in (form factor) |
| Housing | Black PC, ASA and aluminum ADC12 |
| Ingress protection | IP65 per IEC 60529 |
| Operating temperature | -13 to 131°F (-25 to 55°C); see AC supply derating in guide |
| Relative humidity | 0–95% non-condensing |
| Status LEDs | 3 RGB indicators plus 1 white Bluetooth LED |
| Application software | BEA EVOLOOP mobile application (Bluetooth setup/teach-in) |
Applications & Compatibility
- Parking garages and parking lot barriers
- Vehicle entrance gates and controlled traffic lanes
- Toll collection, ticketing and license-plate recognition installations
- Access-control barriers requiring customizable vehicle presence and protection zones
Installation & Important Notes
Mount and wire the sensor in accordance with BEA documentation, use the EVOLOOP app for commissioning and teach-in, and validate the three detection zones on-site. For a safety/protection application, connect and periodically test the specified test input and comply with local gate safety requirements. Do not assume the sensor is a complete barrier safety system.
Ordering & Availability
Price is a USD reference from Protec Controls ($525.00) for part 10EVOLOOP. The original CompuExpress Tijuana page displays $659.00 without a verifiable currency label, so that amount was not used for this USD catalog. Check current selling price and delivery lead time before publication.
BEA EVOLOOP Quick Installation Guide (PDF)