Fast & Reliable Same Day & Expedited Shipping Available!
BEA 10R2E-100, FOCUSED ACTIVE INFRARED REQUEST TO EXIT SENSOR
- SKU:
- 10R2E-100
BEA 10R2E-100,FOCUSED ACTIVE INFRARED REQUEST TO EXIT SENSOR
BEA’s UL Listed R2E-100 is a request-to-exit sensor with an active infrared (AIR) detection zone focused directly on the
door handle. This allows the R2E-100 to only detect people intending to exit through the door as they reach for the door handle.
The AIR based R2E-100 improves accuracy of detection as compared to passive infrared (PIR) technology including
ground based errors, PIR sensor spoofing, known PIR vulnerabilities (hot air, background objects, cross traffic).
Features
- Standards compliant
UL 294 / ULC S319 Listed
- Define your tilt angle
Adjustable tilt angle from 0 – 10°
- Customizable detection zones
Adjustable detection range from 20 – 48 inches*
*The R2E-100 can accommodate swinging doors up to 7 feet
- Low profile mounting
Low profile sensor mounts on or above the door frame
Table of specifications
|
Detector Type |
Focused Active Infrared |
|
Supply Voltage |
12 – 24 VAC / VDC; ±10% @ 60 Hz |
|
Current |
|
|
Temperature (UL Install) |
32 – 120 °F (0 – 49 °C) |
|
Temperature |
-20 – 120 °F (-29 – 49 ºC) |
|
Humidity |
|
|
Detection Range |
20 – 48”, adjustable via potentiometer |
|
Relay |
2 Form “C” contact sets; |
|
Relay Hold Time |
0.5 – 60 s, adjustable via potentiometer |
|
Sounder |
85 dB max, adjustable volume |
|
Indicator LEDs |
Green, Red, Yellow, Orange |
|
REX Input |
DRY contact, NO |
|
Card Reader Input |
DRY contact, NC |
|
Door Position Switch Input |
DRY contact, NO |
|
Dimensions |
6 7⁄10” (W) × 1 7⁄10” (D) × 2” (H) |
|
Material |
Plastic (ABS and PC) |
|
Wiring Interface |
JST (14-pin) with 4’ cable |
|
Norm Conformity |
UL 294 / ULC S319 |
You may also like this
